This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases. If you click a link and make a purchase, I may receive a small commission at no extra cost to you.
How to Make a Lavender Wand With Ribbon
You can make a lavender wand with ribbon by weaving a long satin ribbon around fresh lavender stems to trap the buds inside a neat cage shape.
It’s one of the easiest lavender crafts you’ll ever try, and the results look and smell absolutely amazing.
If you’ve been wondering how to make a lavender wand with ribbon, you’re in the right place.
The whole project takes maybe 15 minutes, and you only need three things: fresh lavender, ribbon, and a pair of scissors.
In this post, we’ll walk through exactly how to make a lavender wand with ribbon step by step, plus tips for choosing the best lavender and getting that weave tight.
Let’s get started.
Why Make a Lavender Wand With Ribbon?
Making a lavender wand with ribbon isn’t just a pretty pastime.
Here’s why this classic craft is worth your time.
1. It Preserves the Fragrance for Months
When you make a lavender wand with ribbon, the weaving action gently crushes the buds and releases their essential oils.
Those oils soak into the ribbon, which is why a finished lavender wand keeps its scent far longer than a loose bundle of dried stems.
The ribbon basically becomes a slow-release scent holder, and every time you squeeze the wand, you get another wave of that fresh lavender aroma.
2. It’s a Traditional Craft With Real Charm
Lavender wands have been made for centuries, and learning how to make a lavender wand with ribbon connects you to that old-world tradition.
People used to tuck them into linen closets, dresser drawers, and hope chests to keep fabrics smelling clean.
Today, a handmade lavender wand with ribbon still makes a lovely gift that feels personal and thoughtful.
3. It Uses Just Three Simple Supplies
To make a lavender wand with ribbon, you need fresh lavender stems with long stalks, about a yard of narrow satin ribbon, and scissors.
That’s honestly it.
No glue, no needles, no special tools are required, which is exactly why this project is perfect for beginners and kids.
How to Make a Lavender Wand With Ribbon Step by Step
Now let’s talk about how to make a lavender wand with ribbon from start to finish.
1. Gather an Odd Number of Stems
Pick 9, 11, or 13 fresh lavender stems with buds that are just starting to open.
An odd number matters because it lets you weave the ribbon in a simple over-and-under pattern without things getting tangled.
If you’re working with dried lavender instead, soften the stems first by wrapping them in a damp paper towel for about an hour.
2. Tie the Ribbon Just Below the Buds
Line up your stems so the flower heads sit at the same height, then tie your ribbon snugly right below the buds.
Leave one long tail hanging, since you’ll use it to weave and later tie everything off.
This first knot anchors the whole project, so make it tight but don’t crush the stems.
3. Bend the Stems Down Around the Buds
Gently bend each stem downward over the flower heads, so they form a cage around the buds.
The buds should sit snugly inside this little basket of stems.
This is the moment your lavender wand starts to take shape, and it’s honestly the most satisfying part.
4. Weave the Ribbon Over and Under
Take your long ribbon tail and weave it over one stem, under the next, and so on around the circle.
Keep the ribbon flat against the stems and pull it snug after each pass so the weave stays even.
This over-and-under pattern is the heart of how to make a lavender wand with ribbon, so take your time here.
5. Work Down the Cage and Tie It Off
Continue weaving row after row, working your way down the stems until the entire flower head is enclosed.
Once you reach the bottom, wrap the ribbon around the stems a few times and tie a firm knot.
Finish with a pretty bow, and your lavender wand with ribbon is complete.
Tips for the Best Lavender Wand With Ribbon
A few small tweaks make a huge difference in how your lavender wand turns out.
1. Choose the Right Ribbon Width
Narrow ribbon, about 1/8 to 1/4 inch wide, works best when you make a lavender wand with ribbon.
Anything wider looks bulky and makes it harder to weave through the tight stems.
Satin ribbon is the classic choice since it holds the oils beautifully and looks elegant.
2. Use Fresh Lavender for Easy Weaving
Fresh stems are flexible, which makes learning how to make a lavender wand with ribbon much easier than using brittle dried ones.
Harvest your lavender in the morning after the dew dries, right when the buds are plump and fragrant.
This is also when the essential oil content is at its peak.
3. Store Your Wand Away From Direct Light
Keep your finished lavender wand in a drawer or closet shelf to protect the color and scent.
If the fragrance fades months later, just squeeze the wand a few times to wake up the oils again.
So, How Do You Make a Lavender Wand With Ribbon?
You make a lavender wand with ribbon by tying a ribbon below fresh buds, bending the stems into a cage, and weaving the ribbon over and under until the flowers are fully enclosed.
It’s a simple, old-fashioned craft with a gorgeous payoff, and once you learn how to make a lavender wand with ribbon, you’ll want to make a whole basket of them.
Grab some fresh lavender, pick out a pretty satin ribbon, and give this project a try this weekend.
Your drawers, your gifts, and your senses will all thank you.